新型的钢丝网骨架管的功能更完善，技术更娴熟，应用更广泛，市场需求更大。随着管材市场的不断扩大，不同成色的管材越来越多，有的质量好，有的质量差，盲目追求利润的管材商常常以次充好，以低廉的价格吸引受众，造成受众上当受骗的情况越拉越多。这里简单介绍下一些钢丝网骨架管的辨认方法。
首先是看颜色，质量好的钢丝网骨架管颜色均匀分布，表面没有任何杂质;触摸是最好的辨别方法，钢丝网骨架管的外表光滑平整，手感柔软，不会出现任何突起或凹下的地方，轻轻一捏，钢丝网骨架管硬度很好，不会发生任何变形，如果有变形就要考虑;外观上差不多时，闻气味也是一种好办法，质量好的钢丝网骨架管没有任何气味，如果有怪异的味道，可能有杂质掺进去了;钢丝网骨架管的壁管很厚，尺寸很均匀，用尺子量量，看是否符合国家标准;试着砸一下管子，看是否有清脆的声音，弹性怎样，有声音，弹性好的就是钢丝网骨架管;最后燃烧后冒黑烟、有刺鼻气味的就是假的，正宗的钢丝网骨架管熔烧后的液体是干净的。
Shandong Wanji Plastic Co., Ltd.
1.10 are produced by Battenfeld and Cincinnati, German: They can produce caliber 20mm-450mm pipes. Our advanced extrusion equipment not only ensures the full plasticization of raw materials, but also effectively prevents the excessive shear degradation of raw materials in the extrusion process, and fully exerts the performance of the raw materials, far higher than the national standards. It has created good conditions for the smooth construction of the pipe.
2. Imported online automatic measurement system and ultrasonic on-line detection device: Each of the company's PE pipe production line equipment is equipped with Innomax online weight control and wall-thickness measurement system, which truly guarantees the consistency of the wall thickness of the pipe.
3. Italian Baiwang raw material dehumidifying and drying system: the Company uses Italian Baiwang dehumidifying dryer, the best brand in the world, which quickly takes away the moisture from plastic raw materials. Eliminates the creation of air bubbles, enabling the product to achieve ideal mechanical, electrical, dimensional stability and appearance. Dehumidifier dryer air pipes are sealed circulatory system, and equipped with filters, so outside climate, in summer of high ambient humidity can be normal production, effectively prevent the production of defective products, greatly reduce the production of waste, and increase productivity.
4. Company's pipe fittings production: our company has 19 injection-molding equipment, that can produce 20mm-1200mm various pipe fittings. Among them, the largest injection-molding machine in China designed and manufactured by Zhejiang Tairui Machinery Co., Ltd. for our company. The maximum clamping force is 2800T, the maximum injection volume is 120,000 grams, and the injection molding diameter dn800mm is molded once. The quality has reached the international level. The level of the product. At present, the company's production of PE pipe has reached more than 600 kinds, fully complete series of supporting production.
手机版
微信公众平台